CLICK ME to Download the LS1M program

LS1M Program

Latest version of the LS1M program for Palm. Right-click the link at left & save the .zip file to a folder on your hard drive. Extract the contents of the .zip file, and run setup.exe.

CLICK ME to Download sample LS1M program

LS1M Demo

Demonstration version of the LS1M program for Palm. Right-click the link at left & save the .zip file to a folder on your hard drive. Extract the contents of the .zip file, and run setup.exe.

CLICK ME to Download sample CDF file (TestRun.csv)

CLICK ME to Download sample EFILive file(TestRun.efi)

Sample Log Files

There are two sample log files available for download. TestRun.csv is a log saved in comma-delimited format, which can easily be imported into a spreadsheet program like Excel. TestRun.efi is the same log in EFILive log-file format. Both were taken after a short drive in a 2000 Z28 (LS1 engine).

CLICK ME to Download Palm Desktop 4.1 from Palm (9mb – PalmDesktop41ENG.exe)

Palm Desktop 4.1

This is the desktop program that is used for hot-synching a Palm PDA. This version is for Windows computers. Other versions are available at the Palm website.

CLICK ME to Download the LS1M Synchronizer (4mb)

LS1M Synchronizer

This program is an add-on for Palm Desktop 4.1. If you already have Palm Desktop installed, download & install the LS1M Synchronizer to allow you to export saved logs from the Palm to the PC. This will work with the LS1M demo just like it does with the regular LS1M program. Unzip it and run setup.exe. [NOTE: Do not simply double-click on the setup.exe from within the zip file. You must extract the files to a folder, and then run setup.exe from that folder.]

CLICK ME to Download rechargeable battery software

Rechargeable Battery Software

This program will calibrate your Palm battery monitor for use with the Charge-N-Run recharger & battery pack. Download this file (right-click on the link at left, then select “Save Target”) to a folder on your hard drive. The run Palm Desktop & click the Install button to add it. The program will load during the next hotsynch.

After it’s been installed, run the Prefs program from the Palm main menu. Select Battery from the list in the upper-right corner. Open the Options menu (click on the Menu icon in the graffiti area), and select “Set CNR83001 Defaults”.